Stand-alone Chart
Individual diagrams can also be inserted on the sheet for an analysis or a table. For example, you can display totals or average values graphically. This is often useful as a supplement to the legend and for classifying the data displayed on the map.
Inserting a Single Diagram
Simply insert the single diagram into the sheet using Drag&Drop from the control window Data. To do this, select the corresponding column of your table and add it to the sheet. In the new dialog window, select Other objects and confirm with OK. The single chart is then based on the table that is used as the data basis for the analysis. After the single diagram is inserted, its Properties can be changed by double-clicking on the diagram.
Single diagrams based on tables
If you select a table as the data basis for the individual diagram, you must then select or define all design details (including diagram type, number of sectors or bars, colors, sizes). By default, the diagram displays the sum of the data in the selected columns of the underlying table. If this is not desired, after inserting the diagram, open its Properties (see above) and select Details another Aggregation (e.g. Average) on the area.
Individual diagrams based on analyses
The single diagram looks exactly the same as the diagrams of the analysis, because EasyMap takes - as far as possible - the diagram settings from the analysis (e.g. diagram type, number of sectors or bars, colors, sizes). The single diagram shows the sums of the data from the table matched with the base map, which is the data basis of the analysis. If you select Details under Diagram size > Proportional as analysis in the area, the single diagram is often considerably larger than the diagrams of the analysis. If this is not desired, select Own size and then set the diagram size independently of the analysis settings.
Note: Please note that a single chart can only refer to one chart analysis.
